BioMed White Resin

Why Choose BioMed White Resin?

Fuel medical innovation using 3D printing and BioMed White Resin for producing end-use devices where performance and biocompatibility are critical.


Medical-Grade Material

Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485.


Good Definition

Produce parts and assemblies with complex designs and geometries.


High Contrast

Create contrast between substances or surfaces to aid in visualization with a white, opaque material.


Biocompatible and Sterilizable Parts

Testing conducted by Formlabs for common use cases is intended to instill confidence that this material is suitable for biocompatible applications.

Applications

Use BioMed White Resin for producing rigid, opaque parts for point-of-care and medical manufacturing applications requiring biocompatibility.

Consider BioMed White Resin for:

End-use medical devices and device components
Cutting and drilling guides
Anatomical models
Patient-specific implant sizing models and molds
Biocompatible Molds, Jigs + Fixtures
Surgical tools and templates

*Unlike Formlabs Dental Resins, no intended uses are provided for BioMed Resins. Material properties may vary based on part design, manufacturing practices and other methods. It is the manufacturer’s responsibility and its respective customers and end-users to determine the biocompatibility and performance of all printed parts for their respective application and use. To instill confidence in potential users, Formlabs has tested biocompatibility and sterilization compatibility for common use cases and manufactures BioMed Resins in an ISO 13485 certified facility. We can offer representative examples of what customers have done with our products and the supporting documentation we make freely available. 

Material Properties

BioMed White Resin

Ultimate Tensile Strength

45.78 MPa

Tensile Modulus

2020.16 MPa

Elongation

10%

Flexural Strength

74.46 MPa

Flexural Modulus

2020.16 MPa

Hardness Shore D

80 D

Notched Izod

15.11 J/m

Heat Deflection Temp @ 0.45 MPa

67 ºC

1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.

2 Data were measured on post-cured samples printed on a Form 3B with 100um BioMed White Resin settings, washed in a Form Wash for 5 minutes in 99% Isopropyl Alcohol.

3 BioMed White Resin was tested at NAMSA World Headquarters, OH, USA.